Material Handling

Quick Coupler

Quick Coupler
Increases machine performance, multiplying the productivity of your machine.
Configuration, Unit, Cylinder, SD300/N, SD310, SD200/N, Model, SDBL30, SDQC20
ConfigurationUnitSD300/N, SD310SD200/N
SDBL30SDQC20
Weight kg 310 221
Overall Length mm 470 385
Overall Width mm 1310 1124
Overall Height mm 760 745
Hyd. Pressure MPa 16 ~ 25 16 ~ 25

Forks

  • Forks

    Forks

    Forks has an open frame design and offset tines for maximum visibility to the tines at working heights.

  • Marble Fork

    Marble Fork

    Marble Fork wider than pallet forks, designed for heavy duty applications. Fork tines can be configured to allow tines to either swing or stay in a fixed position.

Configuration, Unit, Cylinder, SD300/N, SD310, SD200/N, Pallet fork, SDFP30, Marble fork, SDFM30, Pallet fork, SDFP20
ConfigurationUnitSD300/N, SD310SD200/N
Pallet forkMarble forkPallet fork
SDFP30SDFM30SDFP20
Tine Length mm 1780 1450 1070
Overall Length mm 2330 1936 1435
Overall Width mm 1310 470 1124
Carriage Height mm 1117 820 817
Outside Tine Width (max spread) mm 1800 1235 1401
Outside Tine Width (min spread) mm 456 - 361
Tine Thickness mm 70 100 45
Tine Width (single tine) mm 150 200 105
Linkage Type - Pin-on Pin-on Pin-on
Net Weight kg 830 1396.5 350

Grapples

  • General Purpose, Tropical Timber Type

    Log & Lumber Grapple

    Log & Lumber Grapple utilizes flat fork tines and a raised back. In the forestry industry, log and lumber grapples are used to load, unload, move, deck, sort and feed the mill. Their flat tines and raised back are designed specifically for use in handling both unfinished logs and stacked lumber.

  • Grass Grapple

    Grass Grapple

    Grass Grapple unloading grapple uploads trucks, stack and sort timber at the mill. Tine and clamp design permit quick and gentle loading. Forks are available with a kick-out that unloads the fork even at full lift, enabling higher lumber stacking.

Configuration, Unit, Cylinder, SD300/N, SD310, SD200/N, Model, SDBL30, SDQC20
ConfigurationUnitSD300/N, SD310SD200/N
Log & LumberGrassLog & LumberGrass
SDGL30-TSDGG30SDGL20-GSDGL2-TSDGG20
Overall Length mm 1869 1766 1460 1523 1800
Overall Width mm 2300 2887 160 2292 2362
Overall Height mm 1460 1572 1450 1387 1531
Min. Hold Diameter mm 565 - 430 635 2241
Closed Diameter mm 875 - 970 760 -
Max. Clamp Opening mm 1800 2241 1700 1500 -
Working Pressure MPa 16 ~ 25 16 ~ 25 16.5 16 ~ 25 16 ~ 25
Linkage Type - Pin-on Pin-on Pin-on Pin-on Pin-on
Weight kg 1396 1515 959 800 1425